Page 1 of 1

Paint Storm crash when i move layer at begin.

Posted: Fri Oct 16, 2020 3:30 am
by SnarkBucham
Hi, paint storm crash almost more than 50% of the time I do the following: I open paint storm, make a selection and fill it with the paint bucket on the default layer. I create a new layer and drag it by dropping it over the first layer. There I get the critical error message, I get the option to save and paint storm closes. I have a hp i7 laptop with 16g ram and an integrated uhd 620 graphics card. I use windows 10. The page does not let me attach the log (invalid file) so I copy and paste the logs of the two last crash.

WinProc:
onMouseLeftUp
_INTERFACE::sendMessage msg=514 1 2 3
_wnd::getMessage
_wnd::getMessage_Layers

mousex=1770
mousey=541
WindowWidth=1920
WindowHeight=1079
CB=237
tool=20
maintool=42
mbuttondown=0

irf infinitytool=0
irf tooloptions=3
irf somemenu=0
irf curidw=9
irf aw=9
irf curbrprev=0
irf cursheetgroup=0
irf brform_activeitem=0
irf brushesactivegroup=12

brush bristle=0
brush brmode=2
brush mask=0
brush texture=0

CL=1
cd=1
ctrlz_num=4
ctrlz_size=4
numOflayers=2
docWidth=1600
docHeight=900
docPutx1=0
docPuty1=0
docPutx2=1600
docPuty2=900

cm=0
curp=0
numofp=0

GPU enable=1
GPU fastmode=0
GPU support=1
GPU tempsunsupport=0
GPU unsupportFunc=1
GPU vorsSupport=1

Thread save psd=0
Thread lock dcl=0




WinProc:
onMouseLeftUp
_INTERFACE::sendMessage msg=514 1 2 3
_wnd::getMessage
_wnd::getMessage_Layers

mousex=1743
mousey=542
WindowWidth=1920
WindowHeight=1079
CB=237
tool=20
maintool=42
mbuttondown=0

irf infinitytool=0
irf tooloptions=3
irf somemenu=0
irf curidw=9
irf aw=9
irf curbrprev=0
irf cursheetgroup=0
irf brform_activeitem=0
irf brushesactivegroup=12

brush bristle=0
brush brmode=2
brush mask=0
brush texture=0

CL=1
cd=1
ctrlz_num=4
ctrlz_size=4
numOflayers=2
docWidth=1600
docHeight=900
docPutx1=0
docPuty1=0
docPutx2=1600
docPuty2=900

cm=0
curp=0
numofp=0

GPU enable=1
GPU fastmode=0
GPU support=1
GPU tempsunsupport=0
GPU unsupportFunc=1
GPU vorsSupport=1

Thread save psd=0
Thread lock dcl=0